Rako Volt Free contacst to RACOM Rako Interface unit

Photo of Rako Volt Free contacst to RACOM Rako Interface unit - RAVFR

Full product details

Please call 08000 428 969 to discuss your Rako Requirements & for a Detailed Quotation

The RAVFR is a volt-free contact closure to RF interface to convert relay and PIR signals to Rakom RF

What Is It?
• It creates a link between volt-free relay, switch or PIR sensor outputs and Rako RF based receivers.
• The unit accepts 7 contact closures for scenes 1-4, off, raise and lower.
• When connected to a PIR sensor, the unit can be configured to enable and disable the PIR using an RCP RF wall plate or RAMB1 timeclock.

Relay Control

The RAVFR volt-free contact interface allows scene control from ordinary push switches, relays and PIR movement sensors.

In factory default setting, the unit will select scenes 1-4, off and master raise & lower.

When configured with the RASOFT programming software, it is possible to enable and disable switch inputs, select toggle mode and set PIR delay times.

Technical data

Dimensions: 160x50x36mm
Input supply: 12V DC regulated (RAPSU or equiv.)
Weight: 125g
Housing: UL V0 material

Climate range:
• Temperature +2C to +40C
• Humidity +5% to 95% non condensing

Connections:
• 2 way screw terminal for power supply
• 8 way screw terminal for volt-free
• contact closure inputs

Terminal sizes:
• 2.5mm2 for power supply
• 1.0mm2 for contact closure inputs

Standards:
• EMC - EN 5001-1 :1992
• Immunity - EN 50082-1 :1997
• LVD - EN 60950-1 :1992

Communication: Rakom coded fm radio, 433.9MHz
Memory: Flash memory (non volatile)

View Rako Data Sheets

Please call 08000 428 969 to discuss your Rako Requirements & for a Detailed Quotation

Requires 12V DC Supply or RAPSU