Photo of Future Automation Medium (W460 x L510 x H190mm) Projector Lift - PD2
Full product details
The PD range allows projectors to be stored in a ceiling void of as little as 210mm and then lowered on command. A panel is mounted under the projector, which fills the hole in the ceiling when the projector is up. Installed like a ceiling speaker – cut a hole in the plaster and then a lip around the edge of the mechanism covers the cut line. The mechanism can be adjusted so the projector angles downwards when at the bottom.
Functions
• An electric projector drop that lowers a projector as tall 190mm from within a ceiling void of only 210mm.
• Maximum projector size is 400mm Wide, 460mm Long & 190mm High. (These dimensions must include connectors and allowance for air vents etc.)
Suitability
• Requires a ceiling void height of only 210mm and a minimum distance of 575mm between joists.
• Cut out size is 575mm x 575mm projector drop is 570mm x 570mm
• Tilt feature allows for differences between height of screen and height of projector. Ideal for rooms with very high ceilings.
Control
Supplied with basic infrared remote control. Can be learnt by many learning remotes. Also has switch control so can be operated by relays, switches, Crestron / AMX or Lutron systems.
More photos of Future Automation Medium (W460 x L510 x H190mm) Projector Lift - PD2
Reviews - Future Automation Medium (W460 x L510 x H190mm) Projector Lift - PD2
Write a new review now!